NAME¶

firewalld_selinux - Security Enhanced Linux Policy for the firewalld processes

DESCRIPTION¶

Security-Enhanced Linux secures the firewalld processes via flexible mandatory access control.

The firewalld processes execute with the firewalld_t SELinux type. You can check if you have these processes running by executing the ps command with the -Z qualifier.

For example:

ps -eZ | grep firewalld_t

ENTRYPOINTS¶

The firewalld_t SELinux type can be entered via the firewalld_exec_t file type.

The default entrypoint paths for the firewalld_t domain are the following:

/usr/sbin/firewalld

PROCESS TYPES¶

SELinux defines process types (domains) for each process running on the system

You can see the context of a process using the -Z option to ps

Policy governs the access confined processes have to files. SELinux firewalld policy is very flexible allowing users to setup their firewalld processes in as secure a method as possible.

The following process types are defined for firewalld:

firewalld_t

Note: semanage permissive -a firewalld_t can be used to make the process type firewalld_t permissive. SELinux does not deny access to permissive process types, but the AVC (SELinux denials) messages are still generated.

BOOLEANS¶

SELinux policy is customizable based on least access required. firewalld policy is extremely flexible and has several booleans that allow you to manipulate the policy and run firewalld with the tightest access possible.

If you want to allow users to resolve user passwd entries directly from ldap rather then using a sssd server, you must turn on the authlogin_nsswitch_use_ldap boolean. Disabled by default.

setsebool -P authlogin_nsswitch_use_ldap 1

If you want to allow all domains to execute in fips_mode, you must turn on the fips_mode boolean. Enabled by default.

setsebool -P fips_mode 1

If you want to allow confined applications to run with kerberos, you must turn on the kerberos_enabled boolean. Enabled by default.

setsebool -P kerberos_enabled 1

If you want to allow system to run with NIS, you must turn on the nis_enabled boolean. Disabled by default.

setsebool -P nis_enabled 1

If you want to allow confined applications to use nscd shared memory, you must turn on the nscd_use_shm boolean. Enabled by default.

setsebool -P nscd_use_shm 1

MANAGED FILES¶

The SELinux process type firewalld_t can manage files labeled with the following file types. The paths listed are the default paths for these file types. Note the processes UID still need to have DAC permissions.

cluster_conf_t

/etc/cluster(/.*)?

cluster_var_lib_t

/var/lib/pcsd(/.*)?
/var/lib/cluster(/.*)?
/var/lib/openais(/.*)?
/var/lib/pengine(/.*)?
/var/lib/corosync(/.*)?
/usr/lib/heartbeat(/.*)?
/var/lib/heartbeat(/.*)?
/var/lib/pacemaker(/.*)?

cluster_var_run_t

/var/run/crm(/.*)?
/var/run/cman_.*
/var/run/rsctmp(/.*)?
/var/run/aisexec.*
/var/run/heartbeat(/.*)?
/var/run/pcsd-ruby.socket
/var/run/corosync-qnetd(/.*)?
/var/run/corosync-qdevice(/.*)?
/var/run/corosync.pid
/var/run/cpglockd.pid
/var/run/rgmanager.pid
/var/run/cluster/rgmanager.sk

firewalld_etc_rw_t

/etc/firewalld(/.*)?

firewalld_tmp_t

firewalld_tmpfs_t

firewalld_var_run_t

/var/run/firewalld(/.*)?
/var/run/firewalld.pid

net_conf_t

/etc/hosts[^/]*
/etc/yp.conf.*
/etc/denyhosts.*
/etc/hosts.deny.*
/etc/resolv.conf.*
/etc/.resolv.conf.*
/etc/resolv-secure.conf.*
/var/run/cloud-init(/.*)?
/var/run/systemd/network(/.*)?
/etc/sysconfig/networking(/.*)?
/etc/sysconfig/network-scripts(/.*)?
/etc/sysconfig/network-scripts/.*resolv.conf
/var/run/NetworkManager/resolv.conf.*
/etc/ethers
/etc/ntp.conf
/var/run/systemd/resolve/resolv.conf
/var/run/systemd/resolve/stub-resolv.conf

root_t

/sysroot/ostree/deploy/.*-atomic/deploy(/.*)?
/
/initrd

FILE CONTEXTS¶

SELinux requires files to have an extended attribute to define the file type.

You can see the context of a file using the -Z option to ls

Policy governs the access confined processes have to these files. SELinux firewalld policy is very flexible allowing users to setup their firewalld processes in as secure a method as possible.

EQUIVALENCE DIRECTORIES

firewalld policy stores data with multiple different file context types under the /var/run/firewalld directory. If you would like to store the data in a different directory you can use the semanage command to create an equivalence mapping. If you wanted to store this data under the /srv dirctory you would execute the following command:

semanage fcontext -a -e /var/run/firewalld /srv/firewalld
restorecon -R -v /srv/firewalld

STANDARD FILE CONTEXT

SELinux defines the file context types for the firewalld, if you wanted to store files with these types in a diffent paths, you need to execute the semanage command to sepecify alternate labeling and then use restorecon to put the labels on disk.

semanage fcontext -a -t firewalld_unit_file_t '/srv/myfirewalld_content(/.*)?'
restorecon -R -v /srv/myfirewalld_content

Note: SELinux often uses regular expressions to specify labels that match multiple files.

The following file types are defined for firewalld:

firewalld_etc_rw_t

- Set files with the firewalld_etc_rw_t type, if you want to treat the files as firewalld etc read/write content.

firewalld_exec_t

- Set files with the firewalld_exec_t type, if you want to transition an executable to the firewalld_t domain.

firewalld_initrc_exec_t

- Set files with the firewalld_initrc_exec_t type, if you want to transition an executable to the firewalld_initrc_t domain.

firewalld_tmp_t

- Set files with the firewalld_tmp_t type, if you want to store firewalld temporary files in the /tmp directories.

firewalld_tmpfs_t

- Set files with the firewalld_tmpfs_t type, if you want to store firewalld files on a tmpfs file system.

firewalld_unit_file_t

- Set files with the firewalld_unit_file_t type, if you want to treat the files as firewalld unit content.

firewalld_var_log_t

- Set files with the firewalld_var_log_t type, if you want to treat the data as firewalld var log data, usually stored under the /var/log directory.

firewalld_var_run_t

- Set files with the firewalld_var_run_t type, if you want to store the firewalld files under the /run or /var/run directory.

Paths:

/var/run/firewalld(/.*)?, /var/run/firewalld.pid

Note: File context can be temporarily modified with the chcon command. If you want to permanently change the file context you need to use the semanage fcontext command. This will modify the SELinux labeling database. You will need to use restorecon to apply the labels.

COMMANDS¶

semanage fcontext can also be used to manipulate default file context mappings.

semanage permissive can also be used to manipulate whether or not a process type is permissive.

semanage module can also be used to enable/disable/install/remove policy modules.

semanage boolean can also be used to manipulate the booleans

system-config-selinux is a GUI tool available to customize SELinux policy settings.

AUTHOR¶

This manual page was auto-generated using sepolicy manpage .

SEE ALSO¶

selinux(8), firewalld(8), semanage(8), restorecon(8), chcon(1), sepolicy(8), setsebool(8)